Scattering Analysis of Glaze Ice Accretion on CFRP Laminated Composite Plate Structures Using Ultrasonic Lamb Waves: Towards Aviation Safety
【类型】期刊
【作者】Gupta Saurabh Sutrave Siddesh
【刊名】Journal of Nondestructive Evaluation
【关键词】 waves,Scattering,composite,structures,ice,Glaze,dispersion,wave,Lamb,CFRP,detections
【摘要】The ice formation over the aerofoil structure of the aircraft wing has been an obstruction as they abrupt the airflow, acting as drag. The investigation will intend to determine ice accumulation on carbon fiber-reinforced polymer (CFRP), approximated as ice build-up on aircraft wings. The observation is carried out over quasi-isotropic composite laminates using ultrasonic-guided waves with a central working frequency regime of 100 kHz. The three-dimensional (3D) finite element (FE) simulations are performed to observe the scattering effect to explore the reflection site in the far field. This effect was quite prominent for different thicknesses of Glaze ice (G-Ice) and was found to be strongly linked with the wave propagation and dispersion effect. The scattering results for the reflection of Lamb mode, when it interacted with the G-Ice interface, were quite noteworthy along the angular region rather than on the center line, indicating that the scattering was more prominent due to the presence of a 45° or (− 45)-degree fiber orientation in that laminate. A similar but complex scattering phenomenon was observed for different stacking sequences where the wave propagation angle and its amplitude at the receiver nodes are found to be closely bound with the exponential decay in group/phase velocity for the ice thicknesses studied. The FE approach is verified, and the results are validated analytically. Analytically, we have investigated a much-closed approximation with the detectability obtained from three-dimensional studies. Where the dispersion study performed has also contributed to verifying the present investigation in the long wavelength limits. This study can reveal the various optimized locations for placing the sensor for ice detection and quantification, which can be further helpful for practical guided wave inspection in ice detection and its removal.
【年份】2023
【作者单位】grid.412813.d,0000 0001 0687 4946,Vellore Institute of Technology,632014,Vellore,India;https://ror.org/05hs6h993,grid.17088.36,0000 0001 2195 6501,Michigan State University,48824,Lansing,MI,USA
【期号】1
- 1、航空碳纤维复合材料高速铣削材料去除机理研究 作者:王盛 年份:2020
- 2、航空碳纤维复合材料高速铣削材料去除机理研究 作者:王盛 年份:2020
- 3、飞机复合材料蒙皮结构雷击损伤成像监测方法研究 作者:付尚琛,石立华,周颖慧,郭一帆, 年份:2018
- 4、航空复材构件缺陷超声检测定位成像技术研究 作者:熊新梦. 年份:2024
- 5、飞机复合材料蒙皮结构雷击损伤成像监测方法研究 作者:付尚琛,石立华,周颖慧,郭一帆, 年份:2018
- 6、航空复材构件缺陷超声检测定位成像技术研究 作者:熊新梦. 年份:2024